2012年5月3日星期四

China / Grandeur / Junjie replacement of central controller remote matching

(1) Installation:
Grandeur and Junjie series models after central controller installed in the driver's side seat of the black plastic box, you'll need to remove the driver side seat, open the black plastic shell after it is the central controller.
Removed, replace the new central controller, three connectors to the control can be inserted.
The preliminary test before the first do not rush to install on the seat.
If the owners need to install the alarm horn, alarm horn to buy, you need to be resolved by the installation to provide installation services, fixed installation, and then the alarm horn section of ground, the other end of the lead connected to a 24-pin connector of the original car No. 24 pin wiring harness.
If the owners need to install anti-theft LED flashing indication, you need to provide installation services installation to resolve the purchase of the LED, fixed installation, and then the negative ground, positive then No. 21-pin 24-pin connector of the original car on top.
8848 Automotive Technology Forum:
_; Early Chinese car after central controller installed in the rear windshield trim the bottom, you'll need to remove the rear seats and rear trim, can Ibid operation.
(2) debugging:
Prior to debugging needs the first three-button remote control transmitter to match the central controller, remote control to match the method see Section III, and then in turn control the function table to test the function of each item.
Automotive | car repair | repair technology exchange vehicle maintenance information | Genuine Parts | car modification | Tools and Equipment & C # | # j6
obd2

没有评论:

发表评论